Autre/pygate 2/boot.py

+# boot.py -- run on boot-up

Autre/pygate 2/global_conf.json

+{
+  "SX1301_conf": {
+    "lorawan_public": true,
+    "clksrc": 1,
+    "antenna_gain": 0,
+    "radio_0": {
+      "enable": true,
+      "type": "SX1257",
+      "freq": 867500000,
+      "rssi_offset": -166,
+      "tx_enable": true,
+      "tx_freq_min": 863000000,
+      "tx_freq_max": 870000000
+    },
+    "radio_1": {
+      "enable": true,
+      "type": "SX1257",
+      "freq": 868500000,
+      "rssi_offset": -166,
+      "tx_enable": false
+    },
+    "chan_multiSF_0": {
+      "enable": true,
+      "radio": 1,
+      "if": -400000
+    },
+    "chan_multiSF_1": {
+      "enable": true,
+      "radio": 1,
+      "if": -200000
+    },
+    "chan_multiSF_2": {
+      "enable": true,
+      "radio": 1,
+      "if": 0
+    },
+    "chan_multiSF_3": {
+      "enable": true,
+      "radio": 0,
+      "if": -400000
+    },
+    "chan_multiSF_4": {
+      "enable": true,
+      "radio": 0,
+      "if": -200000
+    },
+    "chan_multiSF_5": {
+      "enable": true,
+      "radio": 0,
+      "if": 0
+    },
+    "chan_multiSF_6": {
+      "enable": true,
+      "radio": 0,
+      "if": 200000
+    },
+    "chan_multiSF_7": {
+      "enable": true,
+      "radio": 0,
+      "if": 400000
+    },
+    "chan_Lora_std": {
+      "enable": true,
+      "radio": 1,
+      "if": -200000,
+      "bandwidth": 250000,
+      "spread_factor": 7
+    },
+    "chan_FSK": {
+      "enable": true,
+      "radio": 1,
+      "if": 300000,
+      "bandwidth": 125000,
+      "datarate": 50000
+    },
+    "tx_lut_0": {
+      "pa_gain": 0,
+      "mix_gain": 8,
+      "rf_power": -6,
+      "dig_gain": 0
+    },
+    "tx_lut_1": {
+      "pa_gain": 0,
+      "mix_gain": 10,
+      "rf_power": -3,
+      "dig_gain": 0
+    },
+    "tx_lut_2": {
+      "pa_gain": 0,
+      "mix_gain": 12,
+      "rf_power": 0,
+      "dig_gain": 0
+    },
+    "tx_lut_3": {
+      "pa_gain": 1,
+      "mix_gain": 8,
+      "rf_power": 3,
+      "dig_gain": 0
+    },
+    "tx_lut_4": {
+      "pa_gain": 1,
+      "mix_gain": 10,
+      "rf_power": 6,
+      "dig_gain": 0
+    },
+    "tx_lut_5": {
+      "pa_gain": 1,
+      "mix_gain": 12,
+      "rf_power": 10,
+      "dig_gain": 0
+    },
+    "tx_lut_6": {
+      "pa_gain": 1,
+      "mix_gain": 13,
+      "rf_power": 11,
+      "dig_gain": 0
+    },
+    "tx_lut_7": {
+      "pa_gain": 2,
+      "mix_gain": 9,
+      "rf_power": 12,
+      "dig_gain": 0
+    },
+    "tx_lut_8": {
+      "pa_gain": 1,
+      "mix_gain": 15,
+      "rf_power": 13,
+      "dig_gain": 0
+    },
+    "tx_lut_9": {
+      "pa_gain": 2,
+      "mix_gain": 10,
+      "rf_power": 14,
+      "dig_gain": 0
+    },
+    "tx_lut_10": {
+      "pa_gain": 2,
+      "mix_gain": 11,
+      "rf_power": 16,
+      "dig_gain": 0
+    },
+    "tx_lut_11": {
+      "pa_gain": 3,
+      "mix_gain": 9,
+      "rf_power": 20,
+      "dig_gain": 0
+    },
+    "tx_lut_12": {
+      "pa_gain": 3,
+      "mix_gain": 10,
+      "rf_power": 23,
+      "dig_gain": 0
+    },
+    "tx_lut_13": {
+      "pa_gain": 3,
+      "mix_gain": 11,
+      "rf_power": 25,
+      "dig_gain": 0
+    },
+    "tx_lut_14": {
+      "pa_gain": 3,
+      "mix_gain": 12,
+      "rf_power": 26,
+      "dig_gain": 0
+    },
+    "tx_lut_15": {
+      "pa_gain": 3,
+      "mix_gain": 14,
+      "rf_power": 27,
+      "dig_gain": 0
+    }
+  },
+  "gateway_conf": {
+    "gateway_ID": "2462ABFFFEF4C0B0",
+    "server_address": "eu1.cloud.thethings.network",
+    "serv_port_up": 1700,
+    "serv_port_down": 1700,
+    "servers": [
+      {
+        "gateway_ID": "2462ABFFFEF4C0B0",
+        "server_address": "eu1.cloud.thethings.network",
+        "serv_port_up": 1700,
+        "serv_port_down": 1700,
+        "serv_enabled": true
+      }
+    ]
+  }
+}
\ No newline at end of file

Autre/pygate 2/main.py

+from network import WLAN
+import time
+import machine
+from machine import RTC
+import pycom
+
+print('\nStarting LoRaWAN concentrator')
+# Disable Hearbeat
+pycom.heartbeat(False)
+
+# Define callback function for Pygate events
+def machine_cb (arg):
+    evt = machine.events()
+    if (evt & machine.PYGATE_START_EVT):
+        # Green
+        pycom.rgbled(0x103300)
+    elif (evt & machine.PYGATE_ERROR_EVT):
+        # Red
+        pycom.rgbled(0x331000)
+    elif (evt & machine.PYGATE_STOP_EVT):
+        # RGB off
+        pycom.rgbled(0x000000)
+
+# register callback function
+machine.callback(trigger = (machine.PYGATE_START_EVT | machine.PYGATE_STOP_EVT | machine.PYGATE_ERROR_EVT), handler=machine_cb)
+
+print('Connecting to WiFi...',  end='')
+# Connect to a Wifi Network
+wlan = WLAN(mode=WLAN.STA)
+wlan.connect(ssid='ObjetsConnectes', auth=(WLAN.WPA2, 'Pandemie2021'))
+#wlan.connect(ssid='iPhone de Charlotte', auth=(WLAN.WPA2, 'azilisenoraalan'))
+
+while not wlan.isconnected():
+    print('.', end='')
+    time.sleep(1)
+print(" OK")
+
+# Sync time via NTP server for GW timestamps on Events
+print('Syncing RTC via ntp...', end='')
+rtc = RTC()
+rtc.ntp_sync(server="pool.ntp.org")
+
+while not rtc.synced():
+    print('.', end='')
+    time.sleep(.5)
+print(" OK\n")
+
+# Read the GW config file from Filesystem
+with open('/flash/global_conf.json','r') as fp:
+    buf = fp.read()
+
+# Start the Pygate
+machine.pygate_init(buf)
+# disable degub messages
+# machine.pygate_debug_level(1)
+
+# To stop the Pygate at any time press Ctrl-C on the REPL and run machine.pygate_deinit(). It will take a few seconds to stop the gateway tasks and safely power-off the concentrator.
\ No newline at end of file

Autre/pygate 2/project.pymakr

+[["global_conf.json","f","0b7f1cd0e5713e9ac7c8545200e7a878ec3d5f0e63256fae78c9f85f16a4ea1e",3585],["main.py","f","43545e81570daa6f8f324427fcb4e80f42f70d882168b4a119c3c8f9bf29b460",1383]]
\ No newline at end of file

Autre/pygate 2/pymakr.conf

+{
+  "py_ignore": [
+    ".vscode",
+    ".gitignore",
+    ".git",
+    "env",
+    "venv"
+  ],
+  "name": "pygate"
+}
\ No newline at end of file

Capteur-autonome/Projects/Archives/Tests intégrations/Integration_MAC_SDS011_SHT30_2/src/main.cpp

@@ -102,10 +102,10 @@ void loop() {
   printReadableData(pm.pm25, pm.pm10, data.TemperatureC, data.Humidity);
 
   // Conversion en uint16
-  uint16_t pm25 = pm.pm25 * 10;
-  uint16_t pm10 = pm.pm10 * 10;
-  uint16_t temp = data.TemperatureC * 10;
-  uint16_t hum  = data.Humidity * 10;
+  uint16_t pm25 = pm.pm25 * 100;
+  uint16_t pm10 = pm.pm10 * 100;
+  uint16_t temp = data.TemperatureC * 100;
+  uint16_t hum  = data.Humidity * 100;
 
   // Construction payload en hexadécimal
   char hexPayload[32];