ajout operative et control

.#Operative.vhd et control.vhd

+p24gonot@here.441195
\ No newline at end of file

.nfs0000000002707f970000027c

+#-----------------------------------------------------------
+# Vivado v2024.1 (64-bit)
+# SW Build 5076996 on Wed May 22 18:36:09 MDT 2024
+# IP Build 5075265 on Wed May 22 21:45:21 MDT 2024
+# SharedData Build 5076995 on Wed May 22 18:29:18 MDT 2024
+# Start of session at: Mon May 12 14:08:08 2025
+# Process ID: 426735
+# Current directory: /homes/p24gonot/tp-filtre-etudiant-p24gonot/tp-filtre-etudiant-p24gonot
+# Command line: vivado
+# Log file: /homes/p24gonot/tp-filtre-etudiant-p24gonot/tp-filtre-etudiant-p24gonot/vivado.log
+# Journal file: /homes/p24gonot/tp-filtre-etudiant-p24gonot/tp-filtre-etudiant-p24gonot/vivado.jou
+# Running On        :fl-tp-br-543
+# Platform          :Ubuntu
+# Operating System  :Ubuntu 24.04.2 LTS
+# Processor Detail  :Intel(R) Xeon(R) CPU E5-1607 v4 @ 3.10GHz
+# CPU Frequency     :2494.625 MHz
+# CPU Physical cores:4
+# CPU Logical cores :4
+# Host memory       :16688 MB
+# Swap memory       :4294 MB
+# Total Virtual     :20983 MB
+# Available Virtual :18775 MB
+#-----------------------------------------------------------
+start_gui
+open_project /homes/p24gonot/tp-filtre-etudiant-p24gonot/proj/AudioProc.xpr
+update_compile_order -fileset sources_1
+set_property is_enabled true [get_files  /homes/p24gonot/tp-filtre-etudiant-p24gonot/src/hdl/operativeUnit.vhd]
+update_compile_order -fileset sources_1
+# Disabling source management mode.  This is to allow the top design properties to be set without GUI intervention.
+set_property source_mgmt_mode None [current_project]
+set_property top operativeUnit [get_filesets sim_1]
+set_property top_lib xil_defaultlib [get_filesets sim_1]
+set_property top_file /homes/p24gonot/tp-filtre-etudiant-p24gonot/src/hdl/operativeUnit.v [get_filesets sim_1]
+# Re-enabling previously disabled source management mode.
+set_property source_mgmt_mode All [current_project]
+git add .
+exec
+exec git add .
+exec git status
+exec git commit -m "Premier push, control.vhd fonctionnel, test de operative.vhd"
+exec git push
+exec git push
+exec git pull

.nfs0000000002707fa90000027d

+#-----------------------------------------------------------
+# Vivado v2024.1 (64-bit)
+# SW Build 5076996 on Wed May 22 18:36:09 MDT 2024
+# IP Build 5075265 on Wed May 22 21:45:21 MDT 2024
+# SharedData Build 5076995 on Wed May 22 18:29:18 MDT 2024
+# Start of session at: Mon May 12 14:08:08 2025
+# Process ID: 426735
+# Current directory: /homes/p24gonot/tp-filtre-etudiant-p24gonot/tp-filtre-etudiant-p24gonot
+# Command line: vivado
+# Log file: /homes/p24gonot/tp-filtre-etudiant-p24gonot/tp-filtre-etudiant-p24gonot/vivado.log
+# Journal file: /homes/p24gonot/tp-filtre-etudiant-p24gonot/tp-filtre-etudiant-p24gonot/vivado.jou
+# Running On        :fl-tp-br-543
+# Platform          :Ubuntu
+# Operating System  :Ubuntu 24.04.2 LTS
+# Processor Detail  :Intel(R) Xeon(R) CPU E5-1607 v4 @ 3.10GHz
+# CPU Frequency     :2494.625 MHz
+# CPU Physical cores:4
+# CPU Logical cores :4
+# Host memory       :16688 MB
+# Swap memory       :4294 MB
+# Total Virtual     :20983 MB
+# Available Virtual :18775 MB
+#-----------------------------------------------------------
+start_gui
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es:part0:1.0 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/rev_a/1.0/board.xml as part xcve2802-vsvh1760-2lp-e-s-es1 specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es:part0:1.1 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/rev_a/1.1/board.xml as part xcve2802-vsvh1760-2lp-e-s-es1 specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es_revb:part0:1.0 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/rev_b/1.0/board.xml as part xcve2802-vsvh1760-2mp-e-s-es1 specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:vek280_es_revb:part0:1.1 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vek280/es/rev_b/1.1/board.xml as part xcve2802-vsvh1760-2mp-e-s-es1 specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:vhk158_es:part0:1.0 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vhk158/es/1.0/board.xml as part xcvh1582-vsva3697-2mp-e-s-es1 specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:vhk158_es:part0:1.1 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/vhk158/es/1.1/board.xml as part xcvh1582-vsva3697-2mp-e-s-es1 specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu208ld:part0:2.0 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu208ld/production/2.0/board.xml as part xczu58dr-fsvg1517-2-i specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu216ld:part0:2.0 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu216ld/production/2.0/board.xml as part xczu59dr-ffvf1760-2-i specified in board_part file is either invalid or not available
+WARNING: [Board 49-26] cannot add Board Part xilinx.com:zcu670ld:part0:1.0 available at /usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/xhub/boards/XilinxBoardStore/boards/Xilinx/zcu670ld/1.0/board.xml as part xczu57dr-fsve1156-2-i specified in board_part file is either invalid or not available
+open_project /homes/p24gonot/tp-filtre-etudiant-p24gonot/proj/AudioProc.xpr
+WARNING: [filemgmt 56-3] IP Repository Path: Could not find the directory '/homes/p24gonot/tp-filtre-etudiant-p24gonot/repo'.
+INFO: [filemgmt 56-3] Default IP Output Path : Could not find the directory '/homes/p24gonot/tp-filtre-etudiant-p24gonot/proj/AudioProc.gen/sources_1'.
+Scanning sources...
+Finished scanning sources
+INFO: [IP_Flow 19-234] Refreshing IP repositories
+WARNING: [IP_Flow 19-2248] Failed to load user IP repository '/homes/p24gonot/tp-filtre-etudiant-p24gonot/repo'; Can't find the specified path.
+If this directory should no longer be in your list of user repositories, go to the IP Settings dialog and remove it.
+INFO: [IP_Flow 19-2313] Loaded Vivado IP repository '/usr/home/enstb1/MEE/Xilinx/vivado2024.1/Vivado/2024.1/data/ip'.
+WARNING: [IP_Flow 19-2162] IP 'clk_wiz_0' is locked:
+* IP definition 'Clocking Wizard (5.2)' for IP 'clk_wiz_0' (customized with software release 2015.3) has a newer major version in the IP Catalog.
+open_project: Time (s): cpu = 00:00:10 ; elapsed = 00:00:09 . Memory (MB): peak = 8160.684 ; gain = 255.438 ; free physical = 2644 ; free virtual = 15900
+update_compile_order -fileset sources_1
+set_property is_enabled true [get_files  /homes/p24gonot/tp-filtre-etudiant-p24gonot/src/hdl/operativeUnit.vhd]
+update_compile_order -fileset sources_1
+set_property top operativeUnit [get_filesets sim_1]
+set_property top_lib xil_defaultlib [get_filesets sim_1]
+set_property top_file /homes/p24gonot/tp-filtre-etudiant-p24gonot/src/hdl/operativeUnit.v [get_filesets sim_1]
+git add .
+WARNING: [Common 17-259] Unknown Tcl command 'git add .' sending command to the OS shell for execution. It is recommended to use 'exec' to send the command to the OS shell.
+exec
+wrong # args: should be "exec ?-option ...? arg ?arg ...?"
+exec git add .
+exec git status
+On branch main
+Your branch is up to date with 'origin/main'.
+
+Changes to be committed:
+  (use "git restore --staged <file>..." to unstage)
+	new file:   vivado.jou
+	new file:   vivado.log
+	new file:   vivado_pid426735.str
+
+Changes not staged for commit:
+  (use "git add <file>..." to update what will be committed)
+  (use "git restore <file>..." to discard changes in working directory)
+	modified:   vivado.jou
+	modified:   vivado.log
+	modified:   vivado_pid426735.str
+exec git commit -m "Premier push, control.vhd fonctionnel, test de operative.vhd"
+[main fb3465d] Premier push, control.vhd fonctionnel, test de operative.vhd
+ Committer: Pierre GONOT <p24gonot@fl-tp-br-543.imta.fr>
+Your name and email address were configured automatically based
+on your username and hostname. Please check that they are accurate.
+You can suppress this message by setting them explicitly. Run the
+following command and follow the instructions in your editor to edit
+your configuration file:
+
+    git config --global --edit
+
+After doing this, you may fix the identity used for this commit with:
+
+    git commit --amend --reset-author
+
+ 3 files changed, 573 insertions(+)
+ create mode 100644 vivado.jou
+ create mode 100644 vivado.log
+ create mode 100644 vivado_pid426735.str
+exec git push
+/usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n
+exec git push
+/usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n
+exec git pull
+/usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n

vivado.jou

@@ -36,3 +36,8 @@ set_property source_mgmt_mode All [current_project]
 git add .
 exec
 exec git add .
+exec git status
+exec git commit -m "Premier push, control.vhd fonctionnel, test de operative.vhd"
+exec git push
+exec git push
+exec git pull

vivado.log

@@ -54,3 +54,44 @@ WARNING: [Common 17-259] Unknown Tcl command 'git add .' sending command to the
 exec
 wrong # args: should be "exec ?-option ...? arg ?arg ...?"
 exec git add .
+exec git status
+On branch main
+Your branch is up to date with 'origin/main'.
+
+Changes to be committed:
+  (use "git restore --staged <file>..." to unstage)
+	new file:   vivado.jou
+	new file:   vivado.log
+	new file:   vivado_pid426735.str
+
+Changes not staged for commit:
+  (use "git add <file>..." to update what will be committed)
+  (use "git restore <file>..." to discard changes in working directory)
+	modified:   vivado.jou
+	modified:   vivado.log
+	modified:   vivado_pid426735.str
+exec git commit -m "Premier push, control.vhd fonctionnel, test de operative.vhd"
+[main fb3465d] Premier push, control.vhd fonctionnel, test de operative.vhd
+ Committer: Pierre GONOT <p24gonot@fl-tp-br-543.imta.fr>
+Your name and email address were configured automatically based
+on your username and hostname. Please check that they are accurate.
+You can suppress this message by setting them explicitly. Run the
+following command and follow the instructions in your editor to edit
+your configuration file:
+
+    git config --global --edit
+
+After doing this, you may fix the identity used for this commit with:
+
+    git commit --amend --reset-author
+
+ 3 files changed, 573 insertions(+)
+ create mode 100644 vivado.jou
+ create mode 100644 vivado.log
+ create mode 100644 vivado_pid426735.str
+exec git push
+/usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n
+exec git push
+/usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n
+exec git pull
+/usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n

vivado_pid426735.str

@@ -477,3 +477,50 @@ setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec", true); // h.b (
 // Tcl (Dont Echo) Command: 'rdi::info_commands {ex*}'
 // Tcl (Dont Echo) Command: 'rdi::info_commands {exe*}'
 // Tcl (Dont Echo) Command: 'rdi::info_commands {exec*}'
+setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec git add .", true); // h.b (RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE)
+// Tcl Command: 'exec git add .'
+// Tcl Message: exec git add . 
+// Tcl (Dont Echo) Command: 'rdi::info_commands {e*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {ex*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exe*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exec*}'
+// Elapsed time: 16 seconds
+setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec git status", true); // h.b (RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE)
+// Tcl Command: 'exec git status'
+// Tcl Message: exec git status 
+// Tcl Message: On branch main Your branch is up to date with 'origin/main'.  Changes to be committed:   (use "git restore --staged <file>..." to unstage) 	new file:   vivado.jou 	new file:   vivado.log 	new file:   vivado_pid426735.str  Changes not staged for commit:   (use "git add <file>..." to update what will be committed)   (use "git restore <file>..." to discard changes in working directory) 	modified:   vivado.jou 	modified:   vivado.log 	modified:   vivado_pid426735.str 
+// Tcl (Dont Echo) Command: 'rdi::info_commands {g*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {gi*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {git*}'
+// Tcl (Dont Echo) Command: 'rdi::match_options {git} {}'
+// Tcl (Dont Echo) Command: 'rdi::match_options {git} {m}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {e*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {ex*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exe*}'
+// Elapsed time: 73 seconds
+setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec git commit -m \"Premier push, control.vhd fonctionnel, test de operative.vhd\"", true); // h.b (RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE)
+// Tcl Command: 'exec git commit -m "Premier push, control.vhd fonctionnel, test de operative.vhd"'
+// Tcl Message: exec git commit -m "Premier push, control.vhd fonctionnel, test de operative.vhd" 
+// Tcl Message: [main fb3465d] Premier push, control.vhd fonctionnel, test de operative.vhd  Committer: Pierre GONOT <p24gonot@fl-tp-br-543.imta.fr> Your name and email address were configured automatically based on your username and hostname. Please check that they are accurate. You can suppress this message by setting them explicitly. Run the following command and follow the instructions in your editor to edit your configuration file:      git config --global --edit  After doing this, you may fix the identity used for this commit with:      git commit --amend --reset-author   3 files changed, 573 insertions(+)  create mode 100644 vivado.jou  create mode 100644 vivado.log  create mode 100644 vivado_pid426735.str 
+// Tcl (Dont Echo) Command: 'rdi::info_commands {e*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {ex*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exe*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exec*}'
+setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec git push", true); // h.b (RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE)
+// Tcl Command: 'exec git push'
+// Tcl Message: exec git push 
+// Tcl Message: /usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n 
+// Elapsed time: 25 seconds
+setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec git push", true); // h.b (RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE)
+// Tcl Command: 'exec git push'
+// Tcl Message: exec git push 
+// Tcl Message: /usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n 
+// Tcl (Dont Echo) Command: 'rdi::info_commands {e*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {ex*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exe*}'
+// Tcl (Dont Echo) Command: 'rdi::info_commands {exec*}'
+// Elapsed time: 78 seconds
+setText(RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE, "exec git pull", true); // h.b (RDIResource.CommandsInput_TYPE_TCL_COMMAND_HERE)
+// Tcl Command: 'exec git pull'
+// Tcl Message: exec git pull 
+// Tcl Message: /usr/lib/git-core/git-remote-https: symbol lookup error: /lib/x86_64-linux-gnu/libhogweed.so.6: undefined symbol: __gmpn_cnd_sub_n